Creates a water and dirt-repellent surface
Hydro-X creates a water- and dirt-repellent, very deep-gloss surface that creates a self-cleaning effect and makes future maintenance easier. Exceptionally easy to use even for the average consumer.
The product will last on the surface for 4-5 months depending on subsequent maintenance. For subsequent maintenance, use cleaning agents with a pH of up to 12.0.
A surface treated with Hydro-X can be maintained repeatedly with Hüdro-X, which adds a new protective layer to the surface. It is recommended that the surfaces be recoated after a week.
Hydro-X can also be used on glued parts. It also creates a protective layer on the film.
Areas of application
- Metal, stainless steel, plastic, carbon, glass, plexiglass, stone, marble, ceramics, acrylic, varnished wood and many other water-resistant surfaces
- The Hydro-X product is intended to be used as a replacement for traditional waxes
Features
- Hydro-X creates an extremely shiny and slippery layer on the coated surface
- Reduces the adhesion of dirt (including pitch, salts, insects, grease, bird droppings) to the surface
- Hydrophobic Water repellent layer
- Creates a dirt-repellent layer on the surface
- Self-cleaning effect
- Creates a UV protective layer on the surface (UV-A; UV-B)
- Protection against oxidation
- Anti-static effect
- Protection for up to 5 months
Usage instructions
- 2-4 sprays per detail
- Consumption for a mid-range vehicle: 30-40 ml
Use on the dry surface
- Wash the surface thoroughly, in the case of vehicles it is recommended to remove wax residues
- Dry the car thoroughly
- Apply the product to the detail in a light mist and spread it as evenly as possible
- Polish immediately by hand with a clean microfiber cloth
- Apply detail by detail
Use on wet surfaces
- Wash the surface thoroughly, in the case of vehicles it is recommended to remove wax residues
- Cover 1-2 pieces at a time (1-2 m2)
- Rinse the surface thoroughly with water (do not let it sit on the surface for more than 30 seconds)
- It is recommended to dry with a microfiber cloth to prevent watermarks/residues from forming on the surface
Important
If a gray layer remains on the surface
- You used too much of the product
- The product dried or was on the surface for too long
- The surface was not rinsed long enough
Ingredients
Warning
Causes severe skin burns and eye damage. If medical advice is needed, have a product container or label at hand. Keep out of reach of children. Wash thoroughly after handling. Wear protective gloves / protective clothing/eye protection / protective footwear. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/containers according to the separate collection system used in your municipality.
