Your fingers – invaluable!
Every year approximately 4,000 people are injured on circular saws, corresponding to 16 injuries per working day. Around 26% of serious accidents even result in an accident pension (German Social Accident Insurance (DGUV) statistics ‘Accidents at work 2017). With the new TKS 80 table saw, the risk of most serious cutting injuries during sawing is reduced. While you concentrate on your work, we protect your most valuable tools – your fingers.
- Improved safety: Less risk for your fingers - The responsive sensor on the integrated SawStop technology provides increased safety when sawing in non conductive materials. SawStop technology can also be deactivated if necessary
- Flexible: 80mm cutting height, extendable work surface, stopper and angle stop enable flexible work, even with large workpieces
- Splinter free cuts: Fewer splinters on the upper surface of the material in mitre rip cuts by swivelling the saw blade to the left
- Protects your health: Dust extraction attachment with CLEANTEC extraction sleeve for dust free work and a free view of the workpiece
- Space saving: Tool garage attached on the side provides optimal storage space for saw blades, cartridges and push sticks
Product highlights
- We protect your fingers! - The first Festool saw with innovative SawStop technology for increased safety while sawing. If the saw blade comes into contact with the user's skin, it stops immediately and disappears into the work surface – the risk of serious cutting injuries is reduced
- Splinter-free cuts - Fewer splinters on the upper surface of the material in mitre rip cuts by swivelling the saw blade to the left
- Flexible to use - Variable work up to a cutting height of 80 mm, a work surface that can be extended in its length and width, and improved flexibility thanks to the angle stop
Featured
Integrated SawStop technology - The risk of serious cutting injuries is reduced
Responsive sensor - If the saw blade comes into contact with the users skin, it is stopped within 5 milliseconds and disappears into the work surface
Intelligent cartridge - A cartridge releases a pretensioned spring and pushes an aluminium block into the saw blade. After being triggered, the cartridge is replaced in just a few steps
Flexible cutting height - Flexible cutting height up to 80 mm for larger cross cuts
Maximum precision - Fewer splinters on the upper surface of the material in mitre rip cuts by swivelling the saw blade to the left. More space for your hands and a clear view of the workpiece
Comprehensive system accessories - Work surface can be extended in its length and width. Sliding table for cross-cutting up to 920 mm
Bypass option - SawStop technology can, if necessary, be deactivated. This means that even conductive materials can be machined using the saw
Precise cuts - With locking positions and fine adjuster, can also be used for crosscuts and rip cuts
Healthier working with a system - Dust extraction attachment with CLEANTEC extraction sleeve ensures dust-free work and a free view of the workpiece
Technical data
- Power consumption - 2200 W
- Idle engine speed - 1700-3500 min⁻¹
- Saw blade diameter - 254 mm
- Cutting height 90°/45° - 0-80 / 0-56 mm
- Inclination - -2° - 47°
- Table dimensions - 690 x 580
- Table height, legs folded away - 385 mm
- Table height, legs unfolded - 900 mm
- Dust extraction connection diameter - 27/36 mm
- Weight - 37,0 kg
Noise and vibration values
- Idle state: A-weighted sound power level, LWA - 87.00 dB(A)
- Idle state: A-weighted sound power level, LpA - 102.00 dB(A)
- Idle state: Uncertainty (noise) K - 3.00 dB
Items included
- 1 open ended spaner, size 23
- 1 open ended spaner, size 50
- angle stop
- dust extraction set
- hex key, WAF 5
- HW universal saw blade W40
- KT-TKS 80 cartridge
- workpiece holder
- in carton box
Applications
- Cross-cutting up to a width of 820 mm with sliding table, at a cutting depth of 20 mm
- Rip cutting up to a cutting height of 80 mm and a width of 600 mm with an extension table
- Tilting saw blade for angled cuts between -2° and 47°
