Natural oil for wooden indoor furniture and flooring
A healthy environment – Composed of a blend of 100% natural oils and resins, Lignex Hard Oil deeply nourishes the wood and creates an elegant, stain and abrasion-resistant surface. Particularly suitable for use on furniture and wooden floors in domestic environments, it is safe for people and provides maximum living comfort.
Lignex Hard Oil contains wood oil, linseed oil, castor oil and rosin resin. It is a pure natural and 100% chemical-free oil. It is ideal for the first treatment and maintenance of wooden furniture and floors indoors and offers good protection against domestic chemicals.
- Pure natural oil with no solvents or water
- Gives wood a natural-looking finish
- Enhances the wood’s natural grain
- Penetrates deep into the wood and protects it from the inside
- Resistant to water and household chemical products
- Resistant to wear and abrasion
- Good resistance to stains (coffee, wine, etc.) and dirt
- Easy to maintain
Colour
Colourless, transparent
Applications
- Ideal as initial treatment and maintenance of wooden furniture and flooring in indoor environments.
- Can be used on all native and exotic/tropical woods.
- Application system - brush. Apply a generous quantity of Lignex Hard Oil with a brush and leave it to penetrate the wood. Remove any excess product with a cloth after about 10 minutes.
- Apply a number of coats depending on the absorption of the wood.
- Application temperature - 5-35 °C
- Surface preparation - the wood to be treated must be dry and free from dust and grease. Do not apply to wood with a moisture content over 18%. Remove any poorly anchored old paint or varnish. Clean any resinous areas or pockets on the surface with nitro thinner.
- Application advice - end-grain wood should be treated with more coats of Lignex Hard Oil to reduce water absorption as much as possible.
Drying time
- Can be over-painted after about 24 hours. In low temperatures and/or high humidity the drying time is prolonged proportionally.
Yield
- approx. 15 m²/l per coat, depending on the type of wood
Packaging
